One: fuzzy breakpoint solution
Solution:
1. The breakpoint value is not adjusted properly. You need to adjust the breakpoint value. You can spray the word during the adjustment until the appropriate value.
2. Phase lights are often bright or flashing frequently.
3. The viscosity of the ink is not correct and the viscosity of the ink is adjusted.
4. The nozzle is slightly blocked and the nozzle needs to be opened.
5. The main ink is blocked by the main ink filter and needs to be cleaned or replaced.
6. Incorrect ink pressure adjustment, adjust the ink pressure according to the user manual.
7. The positive pressure of the nozzle is too large to re-adjust the positive pressure of the nozzle.
Nozzle blockage solution
Solution:
1. Perform the nozzle opening procedure. If there is no effect, you can block the recovery nozzle and increase the ink pressure to execute the printer's opening nozzle.
2. Use a water spray wrench to remove the nozzle, soak it in a container filled with thinner or detergent for a while, and try again.
3. If there is an ultrasonic cleaner, the ultrasonic cleaner can be used to clean the nozzle.
Note: Do not install the reverse when installing. The font should be installed down.
Latent profit Q560 small character inkjet printer
Charging fault solution
Specific reasons: a. There is ink on the charging tank b. Charging ink point detection failure
Solution:
a. Turn off the printer (including the power supply) and clean the charging slot. The charging bath can be removed if necessary. After cleaning thoroughly, wait for the charging bath to dry and then turn it on again.
b. This fault should be generated more often, starting with ink. Determine the viscosity of the ink, the shelf life, and of course the quality of the ink (compatible with ink). Then observe the split, check the ink path pressure, modulate the voltage, and make appropriate adjustments to make the splitting good. This kind of fault can generally be solved. It is also possible that the charging slot itself is damaged.
To learn the inkjet printer repair cheats, you must first learn how the inkjet printer works:
In the classification of imported brand models, there are different types of small characters, large characters, lasers, high resolution, etc. According to different principles and different printing methods, there are different learning methods and methods of use. Any cheats cannot let us do it all at once. Want to learn very quickly
PrinterThe use and maintenance knowledge must be down to earth, from the basics, from the theoretical theory, after the system training, we can carry out the actual maintenance operation drills, let us know the familiarity with the marking equipment through step-by-step and planned learning. Gradually improve.
The maintenance of the circuit part of the printer shall vary according to the different printers. More common high-voltage faults, circuit board fuses, keyboard failures, and electrical interference require professional technicians of this model to help solve the problem.For the manufacturer, it is only necessary to tell the technical engineer the specific display of the fault and the phenomenon of the machine.
Article by: Foshan inkjet printerwww.btymxny.com Yucheng Packaging Equipment Co., Ltd. provides the arrangement, this view does not represent the viewpoint of this site.
